Icecast Streaming Media Server Forum Index Icecast Streaming Media Server
Icecast is a Xiph Foundation Project
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Ices Icescast Mp3 et playlist no valid

 
Post new topic   Reply to topic    Icecast Streaming Media Server Forum Index -> Forum Francophone
View previous topic :: View next topic  
Author Message
Anonymous
Guest





PostPosted: Mon Jun 19, 2006 6:19 pm    Post subject: Ices Icescast Mp3 et playlist no valid Reply with quote

Salut!

Je m'acharne tout le temps depuis 2 semaines pour faire du streaming audio avec du mp3

Donc j'ai bien fais l'install de icecast2 et ices 0.4 enfin je pense.
J'ai créer une playlist et mon point de montage.


Cela ne marche toujours pas:

[root@msr ~]# ices
Logfile opened
Could not find a valid playlist file.
Ices Exiting...
[root@msr ~]#

Donc j'ai suivi ce lien:

http://www.streamlab.info/wikini/?wiki=HowToIcesByhand


alors voila le ices.conf: fichier dans/usr/local/etc
<?xml version="1.0"?>
<ices:Configuration xmlns:ices="http://www.icecast.org/projects/ices">
<Playlist>
<!-- This is the filename used as a playlist when using the builtin
playlist handler. -->
<File>playlist.txt</File>
<!-- Set this to 0 if you don't want to randomize your playlist, and to
1 if you do. -->
<Randomize>1</Randomize>
<!-- One of builtin, perl, or python. -->
<Type>builtin</Type>
<!-- Module name to pass to the playlist handler if using perl or python.
If you use the builtin playlist handler then this is ignored -->
<Module>ices</Module>
<!-- Set this to the number of seconds to crossfade between tracks.
Leave out or set to zero to disable crossfading (the default).
<Crossfade>5</Crossfade>
-->
</Playlist>

<Execution>
<!-- Set this to 1 if you want ices to launch in the background as a
daemon -->
<Background>0</Background>
<!-- Set this to 1 if you want to see more verbose output from ices -->
<Verbose>0</Verbose>
<!-- This directory specifies where ices should put the logfile, cue file
and pid file (if daemonizing). Don't use /tmp if you have l33t h4x0rz
on your server. -->
<BaseDirectory>/tmp</BaseDirectory>
</Execution>

<Stream>
<Server>
<!-- Hostname or ip of the icecast server you want to connect to -->
<Hostname>msr.ath.cx</Hostname>
<!-- Port of the same -->
<Port>8000</Port>
<!-- Encoder password on the icecast server -->
<Password>letmein</Password>
<!-- Header protocol to use when communicating with the server.
Shoutcast servers need "icy", icecast 1.x needs "xaudiocast", and
icecast 2.x needs "http". -->
<Protocol>http</Protocol>
</Server>

<!-- The name of the mountpoint on the icecast server -->
<Mountpoint>/mp3</Mountpoint>
<!-- The name of the dumpfile on the server for your stream. DO NOT set
this unless you know what you're doing.
<Dumpfile>ices.dump</Dumpfile>
-->
<!-- The name of you stream, not the name of the song! -->
<Name>Default stream</Name>
<!-- Genre of your stream, be it rock or pop or whatever -->
<Genre>Default genre</Genre>
<!-- Longer description of your stream -->
<Description>Default description</Description>
<!-- URL to a page describing your stream -->
<URL>http://msr.ath.cx/</URL>
<!-- 0 if you don't want the icecast server to publish your stream on
the yp server, 1 if you do -->
<Public>0</Public>

<!-- Stream bitrate, used to specify bitrate if reencoding, otherwise
just used for display on YP and on the server. Try to keep it
accurate -->
<Bitrate>128</Bitrate>
<!-- If this is set to 1, and ices is compiled with liblame support,
ices will reencode the stream on the fly to the stream bitrate. -->
<Reencode>0</Reencode>
<!-- Number of channels to reencode to, 1 for mono or 2 for stereo -->
<!-- Sampe rate to reencode to in Hz. Leave out for LAME's best choice
<Samplerate>44100</Samplerate>
-->
<Channels>2</Channels>
</Stream>
</ices:Configuration>



playlist.txt: fichier dans/usr/local/etc

/mp3/iam.mp3

Si je mets dans ices.conf /usr/local/etc/playlist.txt meme pb.

icecast.xml: fichier dans/etc

<icecast>
<limits>
<clients>100</clients>
<sources>2</sources>
<threadpool>5</threadpool>
<queue-size>524288</queue-size>
<client-timeout>30</client-timeout>
<header-timeout>15</header-timeout>
<source-timeout>10</source-timeout>
<!-- same as burst-on-connect, but this allows for being more
specific on how much to burst. Most people won't need to
change from the default 64k. Applies to all mountpoints -->
<burst-size>65535</burst-size>
</limits>

<authentication>
<!-- Sources log in with username 'source' -->
<source-password>ftppublic</source-password>
<!-- Relays log in username 'relay' -->
<relay-password>ftppublic</relay-password>

<!-- Admin logs in with the username given below -->
<admin-user>admin</admin-user>
<admin-password>admin</admin-password>
</authentication>

<!-- Uncomment this if you want directory listings -->
<!--
<directory>
<yp-url-timeout>15</yp-url-timeout>
<yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
</directory>
<directory>
<yp-url-timeout>15</yp-url-timeout>
<yp-url>http://www.oddsock.org/cgi-bin/yp-cgi</yp-url>
</directory>
-->

<!-- This is the hostname other people will use to connect to your server.
It affects mainly the urls generated by Icecast for playlists and yp
listings. -->
<hostname>msr.ath.cx</hostname>

<!-- You can use these two if you only want a single listener -->
<!--<port>8000</port> -->
<!--<bind-address>127.0.0.1</bind-address>-->

<!-- You may have multiple <listener> elements -->
<listen-socket>
<port>8000</port>
<!-- <bind-address>127.0.0.1</bind-address> -->
</listen-socket>
<!--
<listen-socket>
<port>8001</port>
</listen-socket>
-->

<!--<master-server>127.0.0.1</master-server>-->
<!--<master-server-port>8001</master-server-port>-->
<!--<master-update-interval>120</master-update-interval>-->
<!--<master-password>hackme</master-password>-->
<!--<master-relay-auth>1</master-relay-auth>-->

<!-- setting this makes all relays on-demand unless overridden, this is
useful for master relays which do not have <relay> definitions here.
The default is 0 -->
<!--<relays-on-demand>1</relays-on-demand>-->


<!-- Report <hostname> and this port to master server for redirecting
clients to this slave -->
<!--<master-redirect-port>8000</master-redirect-port>-->

<!-- Relays. State connection information, and by default
request inline metadata for mp3 streams if available.
An on-demand relay will only retrieve the stream if
there are listeners connected -->
<!--
<relay>
<server>127.0.0.1</server>
<port>8001</port>
<mount>/example.ogg</mount>
<local-mount>/different.ogg</local-mount>
<on-demand>1</on-demand>

<relay-shoutcast-metadata>0</relay-shoutcast-metadata>
</relay>
-->

<!-- Only define a <mount> section if you want to use advanced options,
like alternative usernames or passwords
<mount>
<mount-name>/example-complex.ogg</mount-name>

<username>othersource</username>
<password>hackmemore</password>

<max-listeners>1</max-listeners>
<dump-file>/tmp/dump-example1.ogg</dump-file>
<burst-size>65536</burst-size>
<fallback-mount>/example2.ogg</fallback-mount>
<fallback-override>1</fallback-override>
<fallback-when-full>1</fallback-when-full>
<intro>/path/to/stream-intro.ogg</intro>
<hidden>1</hidden>
<authentication type="htpasswd">
<option name="filename" value="myauth"/>
<option name="allow_duplicate_users" value="0"/>
</authentication>
<on-connect>/home/icecast/bin/stream-start</on-connect>
<on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
</mount>
-->
<!-- other auth possibilities include running a command
to do the auth, mount, user and pass are passed via
stdin to the program
<mount>
....
<authentication type="command">
<option name="filename" value="auth_verify"/>
</authentication>

or

for url auth, the add url needs to return a "icecast-auth-user: 1" http
header for a user to authenicate. Both urls are sent params via POST,
add is sent id, mount, user, pass, ip, useragent
remove is passed id, mount, user, pass, duration

<authentication type="url">

state username/password if url requires it

<option name="username" value="admin"/>
<option name="password" value="hackme"/>
<option name="add" value="http://myauthserver.com/scripts/add_listener.php"/>
<option name="remove" value="http://myauthserver.com/scripts/del_listener.php"/>
</authentication>
</mount -->


<fileserve>1</fileserve>

<!-- set the mountpoint for a shoutcast source to use, the default if not
specified is /stream but you can change it here if an alternative is
wanted or an extension is required
<shoutcast-mount>/live.nsv</shoutcast-mount>
-->

<paths>
<!-- basedir is only used if chroot is enabled -->
<basedir>/usr/share/icecast</basedir>

<!-- Note that if <chroot> is turned on below, these paths must both
be relative to the new root, not the original root -->
<logdir>/var/log/icecast</logdir>
<webroot>/usr/share/icecast/web</webroot>
<adminroot>/usr/share/icecast/admin</adminroot>
<pidfile>/var/run/icecast/icecast.pid</pidfile>

<!-- Aliases: treat requests for 'source' path as being for 'dest' path
May be made specific to a port or bound address using the "port"
and "bind-address" attributes.
-->
<!--
<alias source="/foo" dest="/bar"/>
-->
<!-- Aliases: can also be used for simple redirections as well,
this example will redirect all requests for http://server:port/ to
the status page
-->
<alias source="/" dest="/status.xsl"/>
</paths>

<logging>
<accesslog>access.log</accesslog>
<errorlog>error.log</errorlog>
<playlistlog>playlist.log</playlistlog>
<loglevel>4</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
</logging>

<security>
<chroot>0</chroot>
<changeowner>
<user>icecast</user>
<group>icecast</group>
</changeowner>
</security>
</icecast>

les logs indiquent rien a part:

Logfile opened
Could not find a valid playlist file.
Ices Exiting...
Logfile opened
Could not find a valid playlist file.
Ices Exiting...
Logfile opened
Could not find a valid playlist file.
Ices Exiting...
Logfile opened
Could not find a valid playlist file.
Ices Exiting...
Logfile opened
Could not find a valid playlist file.
Ices Exiting...



Merci de votre aide

Merci de votre aide
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Icecast Streaming Media Server Forum Index -> Forum Francophone All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
subRebel style by ktauber