| View previous topic :: View next topic |
| Author |
Message |
Anonymous
Guest
|
 Posted: Mon Jan 21, 2008 9:07 am Post subject: Where must i set these Mountpoints ? |
 |
|
Hello togehter,
first i would say "Thanks @ all Devs" - Icecast is damn hot!
Now to my where must i set these "Mountpoints" ?
My Server runs with Debian Etch and i installed icecast2 via apt-get. Compiled ices0 on the Server because in the Debian repositories is only ices2.
The Icecastserver runs well since some days and everything is fine. Now i want to test some new features like an intro and a authentication. But i see this is done with Mountpoint. But where must i set this ? I run icecast2 with ices0. So must i set this in icecast or in ices0 config ? Here are my current running configs. I never set such a Mountpoint. Only started icecast2 and ices and my stream works out of the box 
icecast.xml
| Code: |
<icecast>
<limits>
<clients>50</clients>
<sources>2</sources>
<threadpool>5</threadpool>
<queue-size>524288</queue-size>
<client-timeout>30</client-timeout>
<header-timeout>15</header-timeout>
<source-timeout>10</source-timeout>
<!-- If enabled, this will provide a burst of data when a client
first connects, thereby significantly reducing the startup
time for listeners that do substantial buffering. However,
it also significantly increases latency between the source
client and listening client. For low-latency setups, you
might want to disable this. -->
<burst-on-connect>1</burst-on-connect>
<!-- same as burst-on-connect, but this allows for being more
specific on how much to burst. Most people won't need to
change from the default 64k. Applies to all mountpoints -->
<burst-size>65535</burst-size>
</limits>
<authentication>
<!-- Sources log in with username 'source' -->
<source-password>mystreampw</source-password>
<!-- Relays log in username 'relay' -->
<relay-password>mystreampw</relay-password>
<!-- Admin logs in with the username given below -->
<admin-user>admin</admin-user>
<admin-password>myrealadminpw</admin-password>
</authentication>
<!-- Uncomment this if you want directory listings -->
<!--
<directory>
<yp-url-timeout>15</yp-url-timeout>
<yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
</directory>
-->
<!-- This is the hostname other people will use to connect to your server.
It affects mainly the urls generated by Icecast for playlists and yp
listings. -->
<hostname>www.mydomain.tld</hostname>
<!-- You can use these two if you only want a single listener -->
<!--<port>8000</port> -->
<!--<bind-address>127.0.0.1</bind-address>-->
<!-- You may have multiple <listener> elements -->
<listen-socket>
<port>8000</port>
<!-- <bind-address>127.0.0.1</bind-address> -->
</listen-socket>
<!--
<listen-socket>
<port>8001</port>
</listen-socket>
-->
<!--<master-server>127.0.0.1</master-server>-->
<!--<master-server-port>8001</master-server-port>-->
<!--<master-update-interval>120</master-update-interval>-->
<!--<master-password>hackme</master-password>-->
<!-- setting this makes all relays on-demand unless overridden, this is
useful for master relays which do not have <relay> definitions here.
The default is 0 -->
<!--<relays-on-demand>1</relays-on-demand>-->
<!--
<relay>
<server>127.0.0.1</server>
<port>8001</port>
<mount>/example.ogg</mount>
<local-mount>/different.ogg</local-mount>
<on-demand>0</on-demand>
<relay-shoutcast-metadata>0</relay-shoutcast-metadata>
</relay>
-->
<!-- Only define a <mount> section if you want to use advanced options,
like alternative usernames or passwords
<mount>
<mount-name>/example-complex.ogg</mount-name>
<username>othersource</username>
<password>hackmemore</password>
<max-listeners>1</max-listeners>
<dump-file>/tmp/dump-example1.ogg</dump-file>
<burst-size>65536</burst-size>
<fallback-mount>/example2.ogg</fallback-mount>
<fallback-override>1</fallback-override>
<fallback-when-full>1</fallback-when-full>
<intro>/example_intro.ogg</intro>
<hidden>1</hidden>
<no-yp>1</no-yp>
<authentication type="htpasswd">
<option name="filename" value="myauth"/>
<option name="allow_duplicate_users" value="0"/>
</authentication>
<on-connect>/home/icecast/bin/stream-start</on-connect>
<on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
</mount>
<mount>
<mount-name>/auth_example.ogg</mount-name>
<authentication type="url">
<option name="mount_add" value="http://myauthserver.net/notify_mount.php"/>
<option name="mount_remove" value="http://myauthserver.net/notify_mount.php"/>
<option name="listener_add" value="http://myauthserver.net/notify_listener.php"/>
<option name="listener_remove" value="http://myauthserver.net/notify_listener.php"/>
</authentication>
</mount>
-->
<fileserve>1</fileserve>
<!-- set the mountpoint for a shoutcast source to use, the default if not
specified is /stream but you can change it here if an alternative is
wanted or an extension is required
<shoutcast-mount>/live.nsv</shoutcast-mount>
-->
<paths>
<!-- basedir is only used if chroot is enabled -->
<basedir>/usr/share/icecast2</basedir>
<!-- Note that if <chroot> is turned on below, these paths must both
be relative to the new root, not the original root -->
<logdir>/var/log/icecast2</logdir>
<webroot>/usr/share/icecast2/web</webroot>
<adminroot>/usr/share/icecast2/admin</adminroot>
<!-- <pidfile>/usr/share/icecast2/icecast.pid</pidfile> -->
<!-- Aliases: treat requests for 'source' path as being for 'dest' path
May be made specific to a port or bound address using the "port"
and "bind-address" attributes.
-->
<!--
<alias source="/foo" dest="/bar"/>
-->
<!-- Aliases: can also be used for simple redirections as well,
this example will redirect all requests for http://server:port/ to
the status page
-->
<alias source="/" dest="/status.xsl"/>
</paths>
<logging>
<accesslog>access.log</accesslog>
<errorlog>error.log</errorlog>
<playlistlog>playlist.log</playlistlog>
<loglevel>1</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
<logsize>10000</logsize> <!-- Max size of a logfile -->
<!-- If logarchive is enabled (1), then when logsize is reached
the logfile will be moved to [error|access|playlist].log.DATESTAMP,
otherwise it will be moved to [error|access|playlist].log.old.
Default is non-archive mode (i.e. overwrite)
-->
<!-- <logarchive>1</logarchive> -->
</logging>
<security>
<chroot>0</chroot>
<!--
<changeowner>
<user>nobody</user>
<group>nogroup</group>
</changeowner>
-->
</security>
</icecast>
|
And here is my ices.conf
| Code: |
<?xml version="1.0"?>
<ices:Configuration xmlns:ices="http://www.icecast.org/projects/ices">
<Playlist>
<!-- This is the filename used as a playlist when using the builtin
playlist handler. -->
<File>/etc/ices2/playlist.txt</File>
<!-- Set this to 0 if you don't want to randomize your playlist, and to
1 if you do. -->
<Randomize>1</Randomize>
<!-- One of builtin, perl, or python. -->
<Type>builtin</Type>
<!-- Module name to pass to the playlist handler if using perl or python.
If you use the builtin playlist handler then this is ignored -->
<Module>ices</Module>
<!-- Set this to the number of seconds to crossfade between tracks.
Leave out or set to zero to disable crossfading (the default).
-->
<Crossfade>5</Crossfade>
</Playlist>
<Execution>
<!-- Set this to 1 if you want ices to launch in the background as a
daemon -->
<Background>1</Background>
<!-- Set this to 1 if you want to see more verbose output from ices -->
<Verbose>0</Verbose>
<!-- This directory specifies where ices should put the logfile, cue file
and pid file (if daemonizing). Don't use /tmp if you have l33t h4x0rz
on your server. -->
<BaseDirectory>/tmp</BaseDirectory>
</Execution>
<Stream>
<Server>
<!-- Hostname or ip of the icecast server you want to connect to -->
<Hostname>localhost</Hostname>
<!-- Port of the same -->
<Port>8000</Port>
<!-- Encoder password on the icecast server -->
<Password>mytreampw</Password>
<!-- Header protocol to use when communicating with the server.
Shoutcast servers need "icy", icecast 1.x needs "xaudiocast", and
icecast 2.x needs "http". -->
<Protocol>http</Protocol>
</Server>
<!-- The name of the mountpoint on the icecast server -->
<Mountpoint>/stream</Mountpoint>
<!-- The name of the dumpfile on the server for your stream. DO NOT set
this unless you know what you're doing.
<Dumpfile>ices.dump</Dumpfile>
-->
<!-- The name of you stream, not the name of the song! -->
<Name>......</Name>
<!-- Genre of your stream, be it rock or pop or whatever -->
<Genre>......</Genre>
<!-- Longer description of your stream -->
<Description>......</Description>
<!-- URL to a page describing your stream -->
<URL>http://www.mydomain.tld</URL>
<!-- 0 if you don't want the icecast server to publish your stream on
the yp server, 1 if you do -->
<Public>0</Public>
<!-- Stream bitrate, used to specify bitrate if reencoding, otherwise
just used for display on YP and on the server. Try to keep it
accurate -->
<Bitrate>128</Bitrate>
<!-- If this is set to 1, and ices is compiled with liblame support,
ices will reencode the stream on the fly to the stream bitrate. -->
<Reencode>1</Reencode>
<!-- Number of channels to reencode to, 1 for mono or 2 for stereo -->
<!-- Sampe rate to reencode to in Hz. Leave out for LAME's best choice
<Samplerate>44100</Samplerate>
-->
<Channels>2</Channels>
</Stream>
</ices:Configuration>
|
Would be nice if someone can give me a hint. I checked the Docu and some external HowTos but there a not such detail configs.
Thanks a lot!
Have a nice Day...
BeNe |
|
| Back to top |
|
 |
kai4711
Joined: 21 Nov 2007
Posts: 30
|
| Posted: Mon Jan 21, 2008 12:45 pm Post subject: |
|
|
Could you please check which version of Icecast is running (ie in admin panel..)...
Maybe in your repository is not the newsest 2.3.1...
Kai |
|
| Back to top |
|
|
Anonymous
Guest
|
| Posted: Mon Jan 21, 2008 12:51 pm Post subject: |
|
|
Oh - sorry!
--> Build Icecast 2.3.1
So this should be ok.
Can you tell me where to set it ?
Greez BeNe |
|
| Back to top |
|
|
karlH
Code Warrior
Joined: 13 Jun 2005
Posts: 5476
Location: UK
|
| Posted: Mon Jan 21, 2008 5:56 pm Post subject: |
|
|
The various mountpoint settings like intro are set within the icecast xml, withing the <mount> section. You have a commented out sample in your own xml file. You don't need to set all the options just the ones you think you need.
karl. |
|
| Back to top |
|
|
Anonymous
Guest
|
| Posted: Mon Jan 21, 2008 8:31 pm Post subject: |
|
|
Thanks for Info!
But does not really work
I tested this in my icecast.xml
| Code: |
<mount>
<mount-name>/stream.ogg</mount-name>
<max-listeners>2</max-listeners>
<intro>/intro.ogg</intro>
</mount>
|
Also tested without mount-name.
max-listeners should be "2" but is still unlimited and no intro is played.
I copied it to the webroot. Loglevel is debug but no entry about it.
How could that be ?
What i not understand, how should the script know that this is the setting
for ices0 ?
And the next is, i can create many mountpoint in the ices.conf so for which point is this setting here in icecast?
Thanks again.
Greez BeNe |
|
| Back to top |
|
|
karlH
Code Warrior
Joined: 13 Jun 2005
Posts: 5476
Location: UK
|
| Posted: Mon Jan 21, 2008 10:28 pm Post subject: |
|
|
The usual reason for a mountpoint setting not being applied has been because the details have been placed within comment markers so therefore get ignored, like in the example you posted.
Assuming ices0 is using the icecast2 protocol then the mountpoint will be passed to icecast, if you are using the shoutcast style protocol then icecast has to assume the mountpoint name.
karl. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2002 phpBB Group
subRebel style by ktauber
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
