Icecast Streaming Media Server Forum Index Icecast Streaming Media Server
Icecast is a Xiph Foundation Project
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Broadcast Not Showing Up in IceCast Stream Directory

 
Post new topic   Reply to topic    Icecast Streaming Media Server Forum Index -> Icecast Server
View previous topic :: View next topic  
Author Message
Anonymous
Guest





PostPosted: Sat Sep 08, 2007 10:18 pm    Post subject: Broadcast Not Showing Up in IceCast Stream Directory Reply with quote

Hello everyone. Just started my Icecast broadcast and for some reason its not listed in the Stream directory. I am able to listen to broadcast on Winamp and WMP. I am using the Orban encoder PC-1010 for the 32k aacp stream and Winamp 5.35 player for my playlist.

stream Winamp: http://192.168.1.2:8000/stream.aacp
WMP (Orban Plugin): icyx:192.168.1.2:8000/stream.aacp

Here is the Icecast config:

<icecast>
<limits>
<clients>100</clients>
<sources>2</sources>
<threadpool>5</threadpool>
<queue-size>524288</queue-size>
<client-timeout>30</client-timeout>
<header-timeout>15</header-timeout>
<source-timeout>10</source-timeout>
<!-- If enabled, this will provide a burst of data when a

client
first connects, thereby significantly reducing the startup
time for listeners that do substantial buffering. However,
it also significantly increases latency between the source
client and listening client. For low-latency setups, you
might want to disable this. -->
<burst-on-connect>1</burst-on-connect>
<!-- same as burst-on-connect, but this allows for being more
specific on how much to burst. Most people won't need to
change from the default 64k. Applies to all mountpoints

-->
<burst-size>65535</burst-size>
</limits>

<authentication>
<!-- Sources log in with username 'source' -->
<source-password>xxxxxx</source-password>
<!-- Relays log in username 'relay' -->
<relay-password>xxxxxx</relay-password>

<!-- Admin logs in with the username given below -->
<admin-user>admin</admin-user>
<admin-password>xxxxxx</admin-password>
</authentication>

<!-- Uncomment this if you want directory listings -->
<!--
<directory>
<yp-url-timeout>15</yp-url-timeout>
<yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
</directory>
<directory>
<yp-url-timeout>15</yp-url-timeout>
<yp-url>http://www.oddsock.org/cgi-bin/yp-cgi</yp-url>
</directory>
-->

<!-- This is the hostname other people will use to connect to your

server.
It affects mainly the urls generated by Icecast for playlists and

yp
listings. -->
<hostname>192.168.1.2</hostname>

<!-- You can use these two if you only want a single listener -->
<!--<port>8000</port> -->
<!--<bind-address>192.168.1.2</bind-address>-->

<!-- You may have multiple <listener> elements -->
<listen-socket>
<port>8000</port>
<!-- <bind-address>127.0.0.1</bind-address> -->
</listen-socket>
<!--
<listen-socket>
<port>8001</port>
</listen-socket>
-->

<!--<master-server>127.0.0.1</master-server>-->
<!--<master-server-port>8001</master-server-port>-->
<!--<master-update-interval>120</master-update-interval>-->
<!--<master-password>hackme</master-password>-->

<!-- setting this makes all relays on-demand unless overridden,

this is
useful for master relays which do not have <relay> definitions

here.
The default is 0 -->
<!--<relays-on-demand>1</relays-on-demand>-->

<!--
<relay>
<server>127.0.0.1</server>
<port>8001</port>
<mount>/example.ogg</mount>
<local-mount>/different.ogg</local-mount>
<on-demand>0</on-demand>

<relay-shoutcast-metadata>0</relay-shoutcast-metadata>
</relay>
-->

<!-- Only define a <mount> section if you want to use advanced

options,
like alternative usernames or passwords
<mount>
<mount-name>/example-complex.ogg</mount-name>

<username>othersource</username>
<password>hackmemore</password>

<max-listeners>1</max-listeners>
<dump-file>/tmp/dump-example1.ogg</dump-file>
<burst-size>65536</burst-size>
<fallback-mount>/example2.ogg</fallback-mount>
<fallback-override>1</fallback-override>
<fallback-when-full>1</fallback-when-full>
<intro>/example_intro.ogg</intro>
<hidden>1</hidden>
<no-yp>1</no-yp>
<authentication type="htpasswd">
<option name="filename" value="myauth"/>
<option name="allow_duplicate_users" value="0"/>
</authentication>
<on-connect>/home/icecast/bin/stream-start</on-connect>
<on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
</mount>

<mount>
<mount-name>/auth_example.ogg</mount-name>
<authentication type="url">
<option name="mount_add"

value="http://myauthserver.net/notify_mount.php"/>
<option name="mount_remove"

value="http://myauthserver.net/notify_mount.php"/>
<option name="listener_add"

value="http://myauthserver.net/notify_listener.php"/>
<option name="listener_remove"

value="http://myauthserver.net/notify_listener.php"/>
</authentication>
</mount>

-->

<fileserve>1</fileserve>

<!-- set the mountpoint for a shoutcast source to use, the default

if not
specified is /stream but you can change it here if an

alternative is
wanted or an extension is required
<shoutcast-mount>/live.nsv</shoutcast-mount>
-->

<paths>
<!-- basedir is only used if chroot is enabled -->
<basedir>./</basedir>

<!-- Note that if <chroot> is turned on below, these paths must

both
be relative to the new root, not the original root -->
<logdir>./logs</logdir>
<webroot>./web</webroot>
<adminroot>./admin</adminroot>
<!-- <pidfile>./icecast.pid</pidfile> -->

<!-- Aliases: treat requests for 'source' path as being for

'dest' path
May be made specific to a port or bound address using the

"port"
and "bind-address" attributes.
-->
<!--
<alias source="/foo" dest="/bar"/>
-->
<!-- Aliases: can also be used for simple redirections as well,
this example will redirect all requests for

http://server:port/ to
the status page
-->
<alias source="/" dest="/status.xsl"/>
</paths>

<logging>
<accesslog>access.log</accesslog>
<errorlog>error.log</errorlog>
<!-- <playlistlog>playlist.log</playlistlog> -->
<loglevel>4</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error

-->
<logsize>10000</logsize> <!-- Max size of a logfile -->
<!-- If logarchive is enabled (1), then when logsize is reached
the logfile will be moved to

[error|access|playlist].log.DATESTAMP,
otherwise it will be moved to

[error|access|playlist].log.old.
Default is non-archive mode (i.e. overwrite)
-->
<!-- <logarchive>1</logarchive> -->
</logging>

<security>
<chroot>0</chroot>
<!--
<changeowner>
<user>nobody</user>
<group>nogroup</group>
</changeowner>
-->
</security>
</icecast>

If someone see's that I have config something wrong, help me out.

Thanks,
The Source
Back to top
karlH
Code Warrior
Code Warrior


Joined: 13 Jun 2005
Posts: 5476
Location: UK

PostPosted: Sat Sep 08, 2007 11:25 pm    Post subject: Reply with quote

I see 2 things wrong in the xml relating to the stream directory not listing the stream.

1. your icecast is not aware of the directory server as you have the entries commented out. BTW oddcast YP is no more.
2. 192.168.x.x is a private address, no internet listener is going to find you with that hostname.

karl.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Icecast Streaming Media Server Forum Index -> Icecast Server All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
subRebel style by ktauber